Unpacking
-
Remove the protective foil from the flight case
-
Take the flight case off the pallet. Use handles attached to the flight case.
IMPORTANT! Do not take off the flight case on your own! This task requires two people.
-
Unlock the 4 locks located on the bottom of the flight case. Turn the lock handle clockwise untill the hook is realesed.
1 2 3 -
Lift the flight case by the handles and take it off.
-
Take protective foils off the printer.
IMPORTANT! If you notice any damages to the printer, please contact our after-sales team.
-
Move the printer, holding the handles in the case, to the target location. You will need the help of another person again.
-
Unlock locks at the top of the flight case (as in point 4).
-
Take the lid off and take out the removable front panel.
-
Keep a flight case for a future trasnport.
Installing
-
Open the nitrogen installation chamber. Grasp the handle and pull it firmly.
-
Remove the protective foil from the nitrogen chamber.
-
Put the nitrogen chamber cover back on its place.
-
Take out the startup box from the service area. It is the opening at the front of the printer below the screen.
-
Install the removable front panel.