Mounting the laser protective glass

1. From the main menu choose UNLOCK LID/OVERFLOW BIN.

2. Press down firmly on the printer lid and pull the lid upword by the handle.

   WARNING! The printer lid is heavy! Risk of crushing hands! Open the lid carefully.

   IMPORTANT! Electrolock! You have 10 seconds to open the printer lid. Then the electrolock will activate and you will have to press the UNLOCK LID/OVERFLOW BIN button again.

3. Remove the split pin from the heating module.

4. Lower the heating module carefully.

5. Remove the plastic protective cap that covers laser module.

6. Take the laser protective glass out of the startup box.

7. Clean the laser protective glass with cotton cloth soaked with ethanol solution, and then wipe it dry.

8. Insert the laser protective glass into the locking holders in the printer lid.

9. Secure laser protective glass with quick release nuts (2 pcs.)

10. Pull the heating module up and secure it with split pin.

---